- Parklift 450
- Parklift 405
- Parklift 340
- Parkbox 401
- Parklift 411
- Parklift 421
- Parklift 403
- Parklift 413
- Parklift 461
- Parklift 462
- Parklift 463
- Parking platform 501
- Parking platform 503
- Turntable 505
- Turntable 506
- Combilift 551
- Combilift 552
- Combilift 543
- Combilift 542
- Combiparker 556
- Slimparker 557 Tower
- Slimparker 557 Shaft
- Crossparker 558
- Parksafe 580
- Parksafe 582
- Parksafe 583
- Parksafe 585
- Levelparker 570
- Levelparker 590
- Multiparker 710
- Multiparker 720
- Multiparker 730
- Multiparker 740
- Multiparker 750
- Multiparker 760
- Car Display Tower
- Wöhr Bikesafe
- IP1-HMT V08 - Driver on board
- IP1-HMT V02 - Vehicle/goods lift
- IP1-CM FF42 - Vehicle/goods lift w/ roof
- IP1-CM MOB - Passenger rated car lift w/ roof
Parklift 450
The new Parklift 450 is designed to replace its predecessor, the Parklift 440. The advantages of this newly redeveloped system lie in the reduced installation dimensions, while the vehicle dimensions remain unchanged.
Parklift 405
The new Parklift 405 replaces its predecessor Parklift 402. The advantages of the new development are in the reduced assembly dimensions with unchanged vehicle dimensions.
Parklift 340
With Parklift 340 reduced installation height and small pit depth is possible.
Parkbox 401
Parkbox 401 increases the number of parking spaces even in tight areas. Dependent parking on two levels above each other without pit.
Parklift 411
The Parklift 411 for dependent parking of two cars above each other. Suitable for outdoor installation.
Parklift 421
Wöhr Parklift 421 makes 3 on 1. On the surface of only one parking place, 3 cars are parked above each other without pit.
Parklift 413
With Parklift 413 three parking places are build-up on one floor level, independently and cost saving.
Parklift 462
The invisible garage: Parklift 462 provides 2 or 4 underground parking places.
Parklift 463
The invisible garage: Parklift 463 provides 3 or 6 underground parking places.
Parking platform 501
By laterally shifting the Parking Platform 501 every bit of available space is utilized and maximised parking surface provided.
Parking platform 503
By longitudinally shifting the Parking Platform 501 every bit of available space is utilized and maximised parking surface provided.
Turntable 505
The Turntable 505 makes turning easy in areas where manoeuvring space is restricted.
Turntable 506
The New Turntable 506 is "super slim" and can be fitted and installed onto virtually any surface.
Combilift 551
Combilift 551: independent parking in 2 levels above each other without pit. By lifting and sliding the platforms, direct access to all parking places at the entrance level.
Combilift 552
A smart combination is to put in a Combilift 551 system behind a Combilift 552; three row arrangement is possible.
Combilift 543
Combilift 543 - compact and spacesaving parking system on 3 levels with an access and exit at the central level.
Combilift 542
The combination of stacking and moving together with a pit arrangement provides additional height in the top level - parking space for Vans, SUV´s is provided.
Combiparker 556
The new Combiparker 556: a space-saving, compact parking solution with a whole new variety of layout options.
Slimparker 557 Tower
Projecting skywards: the new Wöhr Slimparker 557 Tower is slim and versatile
Slimparker 557 Shaft
The Magical - up to 6 parking level are hidden underground and providing up to 23 parking places.
Crossparker 558
The Crossparker 558 gives the Slimparker 557 further width. The magical with an additional plus.
Parksafe 580
Based on storage rack principles, the vehicles are parked fully automatic in a tower or pit version of Parksafe 580.
Parksafe 582
Based on storage rack principles cars can simply and full-automatically be parked in 2 rows behind each other and next to the vertical lift. The Parksafe 582 as tower and/or pit version.
Parksafe 583
The flexibility of the Parksafe 583 allows an optimised utilisation of unusual floor plan areas and provides additional parking places in 1, 2, 3-row arrangement laterally to the vertical lift.
Parksafe 585
The Parksafe 585 is an automatically controlled parking system with storage shelves arranged all-around the vertical lift.
Levelparker 570
In the fully automated system Level Parker 570 cars are slided and glided closer together in a way like a puzzle.
Levelparker 590
The fully automatic space miracle Level Parker 590: space saving parking with single row arrangement on 2 to 5 parking levels without additional ramps or driveways.
Multiparker 710
The Multiparker 710 utilizes clever and smart the available surface and provides parking space on 4 to 8 levels.
Multiparker 720
Multiparker 720 is for smaller floor plan areas featuring high structures, with an emphasis on stacking the parking places on top of one another up to 50 levels high.
Multiparker 730
By the use of a lift and shuttle system, faster access times are ensured with Multiparker 730.
Multiparker 740
The Multiparker 740 is particularly suited to narrow and long floor plan areas and features a fully automatic space saving high rack storage parking arrangement.
Multiparker 750
Multiparker 750 offers parking places in a concrete structure without steel pallets and in up to 30 levels high.
Multiparker 760
Similar to a high rack more car parking places are provided with the pallet-less system Multiparker 760. Cars are simple stacked side by side and one above the other.
Car Display Tower
The Car Display Tower allows free visual connection between customer and service area and is inspiring a confidential feeling.
Wöhr Bikesafe
Bicycle-friendly PARKING: The automatic bicycle parking Wöhr Bikesafe stores safe and quick up to 128 bicycles.
IP1-HMT V08 - Driver on board
The IdealPark IP1-HMT V08 is a platform hoist that is suitable to transport vehicles and passengers between levels. Designed for installation within a fully enclosed shaft, the V08 will handle the largest of vehicles.
IP1-HMT V02 - Vehicle/goods lift
The IdealPark IP1-HMT V02 is suitable for transporting vehicles or goods between floors without the driver on board.
IP1-CM FF42 - Vehicle/goods lift w/ roof
The IdealPark IP1-CM FF42 (without driver on board) can transport vehicles or goods between floors, the inclusion of a roof allows the lift to become seamless until it is required. The FF42 is suitable for travel distances up to 5000mm
IP1-CM MOB - Passenger rated car lift w/ roof
The IdealPark IP1-CM MOB (with driver on board) can transport vehicles and drivers between floors, the inclusion of a roof allows the lift to become seamless until it is required. The MOB is suitable for travel distances up to 5000mm
IP1-HMT V08 - Driver on board
Platform hoist with driver on board – complaint to AS1418.8
Manufactured by our close partners in Italy, the Idealpark Car Lift model IP1-HMT V08 is designed for premium and luxury car dimensions and loads, With only 200mm pit depth, it allows drivers on board during its 11.9 m maximum travel lifting and/or lowering movements.
The IP1-HMT V08, with 3.200 kg load capacity, guarantees complete and total safety during operation, due to several safety features. Idealpark car lift model IP1-HMT V08 with international and local AS certification, allows drivers on board during its 11.9 m maximum travel, lifting and/or lowering procedures, for car parking purposes.
The hoists are managed via PLC with touch screen display that manages several safety devices for the user ranging from protective photocell barriers that monitor the exact position of the car on the platform, to a system for controlling cable tension.
A UPS device allows the descent and the opening of the car lift doors even in the event of a power outage and ensures the driver can exit from the platform.
The lifts with driver on board can be equipped with remote control to call the platform directly from the car. The system is fitted with a telephone dialler that allows the driver to contact the rescue centre operating 24 hours a day, in case of emergency
The standard hoists are offered with a fully galvanised finish and can be coated in Triplex in a wide range of colours to harmonise them with the surrounding environment.
A wide range of possible finishes and innovative designs allow for the perfect insertion of the system in the architecture of the building and ensure maximum safety and comfort to the user.
The IP1-HMT V08 system is designed to be installed both indoors and outdoors.
For a variant of this system without driver on board, please see IP1-HMT V02
Features:
- AS1418.8 compliant and design registered for use in Australia
- Made in Italy by our close partners - IdealPark
- Driver on board.
- High level of operating and functional safety
- Totally hot-dip galvanised with non-slip steel sheet treated platform
- Suitable for residential units, terraced houses, car dealerships etc
- Maximum platform size of 3000mm x 6500mm with weight loading of 3.2 tonne
- Soft speed up/slow down movement for smoothest possible ride
Standard Inclusions:
- Hold-to-run operation on the platform
- Automatic operation from the floor control panel
- Automatic return to selected level
- Automatic landing door opening
- LED platform lighting
- Safety interface with landing doors
- Multi-function traffic light on board
- Control panel with PLC
- Alarm siren
- Photocell presence on board
- Photocell barrier on board with light signal
- Pressure switch overload warning
- UPS device
- Remote assistance
Optional features
- Remote control operation
- Triplex powdercoat finish in a large variety of colours
- Touch screen control panel on board
- Return to selected level at programmable times.
- Automatic timed closing of the landing door.
- Noise protection kit
Please don't hesitate to contact us if you have further queries regarding the IdealPark IP1-HMT V08
Product variants
Gallery
Utilisation
- Family Home
- Office/Apt./Business
- Hotel/Mall
- Public Parking
- Rehab/Renovation
- Outdoor systems
Structure
- A pit is possible
- A pit is not possible
- System with central entrance
User group
- Long-term parking
- Visitors/long-term parking
- Public parking
- Valet parking
